characteristic typical min/max ta= 25 oc ta = -55 oc to +85 oc frequency (mhz) 100 - 2000 mhz 300 - 2000 mhz insertion loss (db) (vc=15v ) 100-500 mhz 2.2 4.0 max. 500-1000 mhz 1.8 3.0 max. 1000-2000 mhz 2.0 2.5 max. max attenuation (db) 100-500 mhz 45 40 min. 500-1000 mhz 40 35 min. 1000-2000 mhz 30 20 min. inputvswr 100-300 mhz 2.0:1 3.0:1 max 300-2000 mhz 2.5:1 3.0:1 max. outputvswr 100-300 mhz 2.00:1 3.0:1 max. 300-2000 mhz 1.75:1 2.0:1 max. flatness over freq. (db) 5-500 mhz 0.5 3.0 max. 5-1000 mhz 1 2.0 max. bias power vdc +15 volts +15 volts ma 8 ma 10 ma max. control power vdc 0 to +15 volts 0 to +15 volts ma 0 to 6.5 ma 0 to 10 ma max. switching speed (nsec) 200 400 max. 10% to 90% typical performance data rf attenuator model tg9030 features ? 100 mhz to 2000 mhz typical ? 35 db attenuation range to 1000 mhz ? operating temp. - 55 oc to + 85 oc ? screening to the tables of mil-std-883 available note: care should always be taken to effectively ground the case of each unit. specifications maximum ratings ambient operating temperature .............. -55oc to + 100 oc storage temperature ............................... -62oc to + 125 oc case temperature ................................................. + 125 oc dc voltage ......................................................... + 18 volts continuous rf input power ................................. + 20 dbm short term rf input powe .... 200 milliwatts (1 minute max.) maximum peak power ...................... 1 watt (3 sec max.) legend + 25 oc + 85 oc - - - - - - -55 oc available as: tg9030, 5 pin to-8 (t5) tng9030, 4 pin .450? sq. surface mount (sm3) BXG9030, connectorized housing (h6) revision 6/5/2012 spectrum microwave 2144 franklin drive n.e. palm bay, florida 32905 ph (888) 553-7531 fax (888) 553-7532 spectrum microwave 2707 black lake place philadelphia, pa. 19154 ph (215) 464-4000 fax (215) 464-4001 www.spectrummicrowave.com 40 60 50 25 70 75 0 5 10 15 20 25 30 35 40 0 2.0 4.0 6.0 1.0 2.0 3.0 1.0 2.0 3.0 +140 +120 +100 + 80 + 60 + 40 + 20 0 - 20 - 40 - 60 v = +15 v v = +4.3 v c v = +2.7 v c v = +2.3 v c c v = 0 v c v = +15 v c v = +2.6 v c v = 0 v c v = +15 v c v = 0v c v = +2.3 v c +2.5 v +2.7 v +4.3 v v = +15 v c 0 30 65 55 45 35 2nd harmonic 3rd harmonic ip3 ip2 start 100 mhz stop 2000 mhz start 100 mhz stop 2000 mhz 10 50 start 100 mhz stop 2000 mhz start 100 mhz stop 2000 mhz 40 30 20 start 100 mhz stop 2000 mhz input vswr output vswr phase (degrees) vs. frequency distortion products (dbc) vs. attenuation @ 500 mhz insertion loss (db) @ vcontrol = +15 volts att e nuation ( d b ) v s .f r e qu e ncy v s . c ont r ol v oltag e ( v olt s ) attenuation (db)
|
